30mm Accessories starting at only $0.57! Configure below.
We offer four types of 30mm extended clamp rings that guard against accidental operation. Use our Extended Clamp Rings (ECR or AECR) with flush caps, our Clear Guarded Clamp Ring (EECR) with illuminated push buttons and our Large Extended Clamp Ring (LECR) with flush or extended caps, which also provides easier access to your push buttons.
To simplify tightening and loosening of standard polyester and aluminum 1-3/8" (34.9mm) octagonal clamp rings. Won't scratch your lens or panel.
Our PPGD guards against accidental operation and is made of a high strength polyester material.
Use to seal unused panel holes. Our hole plug comes with additional sealing panel gaskets to ease installation and is rated Type 4X.
Our IP20 terminal guards protect against accidental contact with live parts and can be ordered separately as an accessory or factory installed providing the convenience of a single catalog number. Note: IP20 terminal guards must be installed before wiring. For terminal marking convenience, our guards can be utilized with Series WTB2 markers.
c3controls offers a wide variety of 30mm corrosive resistant lock-off attachments for maintained and momentary push buttons and selector switches. Our LOAX, LOAM, and LOAP lock-offs permit locking operators in the depressed position. Our LOAFC lock-off covers and locks the operator so its position cannot be changed and features a 1/4" (6.4mm) diameter padlocking hasp.
Our panel gaskets are constructed of Neoprene for long life and low compression set and provide a watertight seal. Panel gaskets are supplied to accommodate different panel thickness. In order to meet Type 4/4X requirements, at least one 1/16" (1.6mm) gasket must be used. Note: All c3controls 30mm operators are provided with gaskets.
Use with a secondary standard cap and mechanical interlock to provide two button momentary/maintained operation or use on adjacent operators with mechanical interlock to provide two-button maintained/maintained operation.
Anti-rotation device for use with 30mm push buttons, selector switches and pilot lights to provide additional protection from rotation and aid in alignment. This product is optional with c3controls gasket technology.
Our mechanical interlock features a 2" (50.8mm) center and can be used to interlock two adjacent operators. This may also be used to interlock a two-unit maintained/momentary assembly. Note: Factory installation is recommended.
Used to facilitate the removal of lamps particularly in illuminated push buttons and push-to-test operators.
Download our comprehensive, user-friendly product catalog today!
ISO 9001:2015
Certified
17+ Million Product
Configurations
Lifetime
Warranty
Guaranteed
Same-Day Shipping
Advantage Pricing
Save Up To 40%
c3controls Headquarters, USA
664 State Avenue
Beaver, PA 15009