Our front mounted auxiliary contacts feature IP20 guarded terminals to protect against accidental contact with live parts. The device identification marker simplifies troubleshooting in panels with many contactors. These contacts snap-on and install without the use of tools.

Side mounted auxiliary contacts feature IP20 guarded terminals to protect against accidental contact with live parts.

Our mechanical interlocks are for use with reversing contactors, reversing starters, two-speed starters and star-delta (wye-delta) starters. The interlock prevents the forward and reverse contactors from being actuated/energized at the same time.

The Electrical & Mechanical Interlock version includes two normally closed auxiliaries built into the unit for electrical interlocking, eliminating the need for two normally closed auxiliary contacts and the mechanical interlock. The result of integrating the normally closed auxiliary contact is decreased width of reversing contactors and more available auxiliary contact locations.

Right side mounted electronic timers for use with miniature contactors are available in On-Delay and Off-Delay configurations with timing ranges up to 30 seconds. The modules install without the use of tools, and can be used in conjunction with all other accessories.

Surge suppressors protect sensitive electronic components from damaging line voltage spikes. The modules install without the use of tools, and can be used in conjunction with all other accessories. Note: Coil mounted on standard contactors and front mounted on miniature contactors.

Reversing contactor power wiring modules make field assembly of reversing contactors easy. Line and load side over-molded copper bus bar conductors ensure error free installation and make for a rigid assembly with a mechanical interlock or electrical/mechanical interlock.

The printed circuit board link module enables miniature contactors and control relays to be mounted directly on electronic printed circuit boards. The module is rated 16A AC-3 and 22A AC-1.

AC and DC replacement operating coils for control circuit application flexibility.

Operating Coils/Frequencies for Standard Contactors: 12-600V AC (50Hz, 60Hz, 50/60Hz), and 12-250V DC.

Operating Coils/Frequencies for Miniature Contactors and Control Relays: 24-600V AC (50Hz, 60Hz, 50/60Hz), and 12-250V DC.