Enclosures
Enclosures starting at only $12.11! Configure below.
Product Resources
Product Features
- Available in three rugged constructions: polyester, polycarbonate and die-cast aluminum.
- Options up to four holes, or unpunched.
- Accommodations available for 22mm and 30mm pilot devices, and disconnect switches.
- A variety of seals keep dust and moisture out of the enclosures.
- UL Listed and CSA certified.
- Note: Design is subject to change without notice. Pictures shown may not represent current design.
Configure Your Item Here
Please configure the product to display product details.
Polycarbonate
- Available for 30mm and 22mm pilot devices, and disconnect switches.
- Rugged polycarbonate construction, high quality and sealed.
- High temperature neoprene gasket.
- Highly efficient seal provides ingress protection against dust and moistures.
- Cover gasket is housed in a recess in the lid which mates up with a tongue.
- Standard quarter turn quick release lid fixings.
- Oil and corrosion resistant.
- Standard color: Light Grey
- Type 1, 4/4X, 12 & IP65
- IP65 protection for watertight and dust-tight construction
- Application Temperature Range: -40 to 80 degrees C (-40 to 176 F)
Polycarbonate (Optimized for 22mm IEC Devices)
- Rugged polycarbonate construction, lightweight with high impact resistance.
- Custom fit for use with our 22mm IEC pilot and signaling devices.
- UV and corrosion resistant.
- Stainless steel hardware including #8 thread form screws.
- Enclosure cover is keyed for enhanced safety and to prevent misalignment during installation.
- Screw cover accessory, included as standard, to prevent debris build-up.
- For easy installation, the enclosure has two (2) lateral M20 conduit entries and two (2) base conduit entries.
- Standard Colors: Grey and Yellow
- UL Listed Type 1, 2, 3, 3R, 4/4X, 12 & 13
- IP66 protection
- Operating temperatures from -40 to +55 degrees C (-40 to +131 F)
Polyester
- Available for 30mm and 22mm pilot devices.
- Solid fiberglass reinforced polyester construction, lightweight with high impact resistance.
- Non-conductive double insulated material.
- Formed-In-Place (FIP) continuous polyurethane gasket that provides a complete watertight, dust tight environmental seal.
- Recessed captive 316 Series stainless steel cover screws.
- Designed for general electrical and electronic applications and any application that has an associated environmental concern.
- Soft edge design reduces dust and other particle corrosion.
- Watertight, non-corrosive environmental design.
- UV and chemical resistant.
- Punched enclosures feature notched keyholes for both 30mm and 22mm styles.
- Standard Color: RAL 7035
- Type 1, 2, 3, 3R, 4X, 12, 13 & IP66
- RoHS Compliant
Die Cast Aluminum
- Available for 30mm and 22mm pilot devices, and disconnect switches.
- Die cast aluminum alloy construction.
- High temperature neoprene gaskets are oil and petroleum resistant.
- Highly efficient seal provides ingress protection against dust and moistures.
- Cover gasket is housed in a recess in the lid which mates up with a tongue.
- Oil and corrosion resistant.
- Stainless steel captive lid retaining screws.
- Standard finish: Smooth powder coat grey
- 30mm & 22mm Enclosures rated Type 1, 3R, 4, 12, IP66 & IP67
- Disconnect Enclosures rated Type 4/4X, IP66 & IP67
- IP67 protection with a working temperature within -40 to 80 degrees C (-40 to 176 F)
Explore Our Family of Products
Download our comprehensive, user-friendly product catalog today!