The Applications of Electrical Terminal Blocks in Industrial Automation

Looking for a solution to simplify your wiring and enhance your panel quality while saving on valuable installation time?

c3controls IEC Terminal Block configurations available in both screw clamp and spring clamp connections from 5mm to 25mm with ratings from 20A to 232A.


By 2022, fixed automation is expected to reach $120 billion US dollars. In the world of factory automation, there has been a continued effort to operate multiple processes in a controlled manner.

Mass production is therefore helped by increasing production quality and reducing time. Having the proper electronic equipment located in the control cabinet is crucial.

Terminal blocks are a vital part of the process. They help to implement signal distribution and safe energy and it’s important to know more about how they work and when to use them.

Keep reading to learn everything you need to know about the wire terminal block.

What Terminal Blocks Are

A terminal block is a modular, insulated block that secures two or more wires together. Factories use terminal blocks to secure and/or terminate wires.

In their most basic form, terminal blocks consist of several individual terminals which are arranged in a long strip. The terminal block is most useful for connecting wiring to ground.

There are hundreds of millions of terminal blocks in use today, with more being installed every day.

Advantages of Terminal Blocks

The biggest advantage of terminal blocks is the cost. They’re cheaper compared to other types of connectors.

Terminal blocks also can be a time saver as the process to connect wires isn’t as elaborate as some others are. Most well-equipped shops can connect wires using a terminal block easily just by stripping them.

Reduce Space

By investing in multi-level terminal blocks you can reduce panel space by up to 50%. That’s because the multi-level blocks contain multiple levels of circuits with that single block.

Increase Safety

Terminal blocks increase safety by grounding, isolating, and protecting the other components in the electrical circuit. Terminal blocks are available with finger-safe connections to prevent electrical shock.

And, terminal blocks can also provide test points, which add even more safety to the circuit.

Easy Installation

They can then be installed using a screwdriver. They also ensure fast connection/disconnection which helps with both maintenance and troubleshooting.

With electrical power, the electrical terminal block is used to connect electrical switches and outlets to the mains.

Made of Copper Alloy

Most terminal bodies consist of a copper alloy that uses the same expansion coefficient as the wire intended for use. Using the same expansion coefficient helps prevent loosening due to differing expansion rates.

It also reduces corrosion which is caused by electrolytic action between two different metals.

Disadvantages of Terminal Blocks

The biggest disadvantage of terminal blocks is that wires can be knocked loose from them if vibration or jostling happens. Even well-secured connections are vulnerable to being knocked loose.

Always test connections prior to implementing it. Make sure it can withstand the conditions it’s being put to.

Terminal blocks are also sometimes too large for the areas where they’re needed. They often make better options where in-cab and non-essential wiring is used.

Types of Terminal Block Structures

Terminal blocks can be classified both according to their structure and their device type.

Device Types

Terminal blocks can be grouped by the type of device they connect or by the application.

1. Disconnect Blocks make it easy to disconnect a circuit using a knife switch without having to remove any wires. Switch block is another name they’re known as.

2. Fuse Holders help connect numerous devices together that use several fuses. Only the wiring sections connected to the fuse holder are affected if a short circuit happens.

3. Ground Circuit Terminals ground systems or components. They can be inserted into a block and are usually interchangeable with standard terminal blocks.

4. I/O Blocks allow devices and controllers to communicate with one another.

5. Power Distribution Blocks terminate power cables.

6. Sensor/Actuator Blocks are used to handle devices such as photoelectronic sensors and proximity sensors that have three or four wires.

7. Thermocouple Blocks connect thermocouples. They also provide consistent metal connections which measure temperature.

Structure Types

1. Single Feed Through

The most basic type of terminal block is single feed products. These are used for wire-to-wire


Single feed terminal blocks have one output and one input contact. The two separate wires are fed into either side of the terminal block. Then they’re connected within its housing.

2. Dual Level

Dual level terminal blocks use two levels of contacts. This helps simplify wiring and save space.

Often, multi-level products use a bridge to connect one contact level to another. This increases circuit flexibility.

3. Three Level

Level three terminal blocks are the same as dual level products, but with an extra stacked level of contacts. And like dual level terminal blocks, they can be bridged.

4. High Density Terminal Blocks

High Density Terminal Blocks are designed with the OEM in mind. They are simple to install and the large marking strips can be hand marked or custom printed to provide quick and accurate identification of the terminals.

Terminal Block Features

Some terminal blocks include one or more special features.

Pluggable Terminal Blocks

With pluggable terminal blocks, the wire connections allow the circuit to be broken without the following:

  • Enabling quick disconnection
  • Unwiring
  • Testing
  • Maintenance

By combining pluggable terminal blocks in a certain manner, it’s possible to disconnect power to an entire group of terminals at once by simply removing a single plug.

Stackable Terminal Blocks

To save space, stackable terminal blocks can be mounted next to each other. Typically, they are DIN rail mounted devices.

Indicator Light

Some terminal blocks feature an indicator light. This light-emitting diode (LED) verifies that the current is flowing through the device.


Terminal blocks with diodes between circuits allow for lamp testing. They also provide protection against reverse polarity.

Orientation and Specifications

Terminal blocks commonly come in three different wire entry angles:

  • 45°
  • 90° (horizontal)
  • 180° (vertical)

How the wire is attached to the block is known as contact, position, way or pole. When purchasing terminal blocks, it’s important to know the number of contacts in order to match the number with the number of wires necessary for application.

Contact pitch relates directly to the number of contacts and is expressed in millimeters. It’s the distance between each contact measured from the center of each opening or hole.

Installation Guidelines for a Screw-In Terminal Block

Once you know the exact terminal block type and have purchased it, it’s time to install it. Turn off any electrical equipment prior to installation for safety reasons.

If you have a screw-in terminal block, strip a small amount of insulation from the end of the terminal block wiring. Typically, one inch works fine but may depend on the component being used.

Unscrew the retaining screw from the terminal block. Then insert the wire into the hole.

Take Care to Fully Tighten the Screw

Carefully tighten the screw into place. It’s important to fully tighten the wire because if not, the wire will heat up and melt the insulation. That could cause a fire.

Secure Plug-In Connection

Once you’ve positioned the terminal block, run the electrical wires to it. Then connect the male terminal to the female port.

Next, press firmly to ensure a secure connection that won’t come loose due to movement.

Test Equipment for Safety

After making all the connections to the terminal blocks, it’s time to test the equipment to ensure it’s working correctly. It’s extremely important to test everything to make sure everyone is working in a safe environment.

Don’t forget to check the terminal block as well as the connections to ensure there’s no excessive heat being built up.

Check the wires to make sure they’re still securely in place.

Mounting Terminal Blocks

Most terminal blocks are either screwed into a panel, snapped onto a metal rail or mounted on a printed circuit board.


Terminal blocks that are mounted are usually done on some form of a DIN rail (Deutsches Institut fur Normung). DIN is the German standards body that originally published rail specifications.

Terminal blocks are manufactured to fit in one of several DIN rail sizes such as:

1. Miniature Top-Hat Rails

Miniature top-hat rails are 15 mm wide. They are rated to 300V.

2. G32 Rails

As their name suggests, these rails are shaped like the letter ‘G’ and are 32 mm wide. They can handle terminal blocks rated to 60V.

3. Top-Hat Rails

Top-hat rails look exactly like their miniature version except they are 35 mm wide. They’re rated to 600V.

4. PCB Mount

There are also terminal blocks which are manufactured for mounting on printed circuit boards. Some products can be plugged into a pin strip which is mounted to the board.

Others have integral pins for mounting through the circuit board. These are also known as electronic blocks.

Method Options to Achieve Wire Connection

There are several different methods to choose from to achieve wire connection using terminal blocks.

Insulation Displacement Connections (IDC)

Insulation displacement connections allow connections to be made by pushing the wire between two sharp pieces of metal. This makes the connection without exposing any bare wire.

Screw Clamps

Screw clamps make an electrical connection by using a screw to tighten the wire. They are the industry standard in termination methods.

Screw clamps are able to accommodate wide ranges of wire sizes. They also provide reliable connections.

Spring Clamps

Spring clamps retain wire clamping by using the force of the spring. They’re a new alternative to screw clamps.

Spring clamps are most useful in applications where there are limited working space and small wire diameters to take into consideration.

Tab Connections

Tab connections are also known as blade or spade terminals. They were designed to be inserted and removed quickly without any need for soldering.

Applications for Terminal Blocks in Industrial Settings

Terminal blocks are commonly used in industrial equipment such as wired support boxes and control boxes. It’s common to see terminal blocks in the following types of equipment used in industrial settings:

  • Blowers
  • Control panels
  • Electrical substations
  • Energy efficient lighting (LED)
  • LED municipal outdoor and street lighting
  • All Electrical Machinery
  • Refrigeration control
  • Variable speed/frequency drivers
  • Anywhere power is distributed!

Which type of terminal block you require depends on a few factors.

Since there are several types of terminal blocks available, it’s vital to know which one is the right choice before installation.

Current Requirement

The current requirement is the most important thing to consider when choosing which type of terminal block to use. That’s because if too much current is pushed through a terminal block, it can overheat and destroy the terminal block.

Make sure the terminal block can handle the expected use of the current and then add 50% more just to be safe.

Voltage Requirements

Taking the voltage amount into consideration is also important. Otherwise, the voltage can cause problems with dielectric breakdown.

The voltage may be too high for the terminal block and cause current leakage between terminal blocks that are located in close proximity. Be aware that high voltage requirements are rare in design.

Most of the time, voltage considerations are ignored for voltages under 100V. Despite this, it’s still a good idea to check the voltage prior to choosing a terminal block.

Wire Being Used

Wires are not made equally. Each wire type comes with its own set of advantages and disadvantages.

Make sure when choosing a terminal block for a cable to know the size of the cable. It needs to physically fit into the terminal block.

Find out if it’s a single-core or multi-core because multi-core wires work better with screw terminals. Meanwhile, single-core wires work better with push-fit connectors.

Environmental and Mechanical Strength

Consider the environment when choosing a terminal block. Some terminal blocks are made to be mechanically strong. They can handle high currents.

However, if the connection is used in naval environments, the salt air can corrode the metal contacts.

What environment the terminal block is used in can create wide temperate swings and/or contain mechanical vibrations. If that happens, the screw terminations can become unreliable.

Trust Us to Provide You With the Best Products

We pride ourselves on providing above-the-board customer service and high-quality products whether you’re buying terminal blocks, tower lights or anything else you need to run your facility efficiently.

We want to help you find exactly what you’re looking for. Click here to request a catalog.

The content provided is intended solely for general information purposes and is provided with the understanding that the authors and publishers are not herein engaged in rendering engineering or other professional advice or services. The practice of engineering is driven by site-specific circumstances unique to each project. Consequently, any use of this information should be done only in consultation with a qualified and licensed professional who can take into account all relevant factors and desired outcomes. The information was posted with reasonable care and attention. However, it is possible that some information is incomplete, incorrect, or inapplicable to particular circumstances or conditions. We do not accept liability for direct or indirect losses resulting from using, relying or acting upon information in this blog post.